Split Core Current Switch Normally Closed - CR9480

The CR9480 Series is a low cost, self powered, fixed set-point Current Switch designed for applications that require an on-off indication of current flow.

27" Diameter Window Current Sensor - CR9521

The CR9521 Series Current Sensors provides a cost effective method for monitoring electrical current. 0-5 VDC signal proportional to the input AC current.

61" Diameter Window Current Sensor - CR9550

The CR9550 Series Current Sensors provides a cost effective method for monitoring electrical current. 0-5 VDC signal proportional to the input AC current.

Split Core Current Sensor - CR9580

CR9580 Current Sensor generates a 0-5 VDC signal proportional to the input AC current. used with process control and industrial instrumentation equipment.

Adjustable Current Switch Normally Open - CR9621

The CR9600 Series is a low cost, self powered, adjustable set-point Current Switch designed for applications that require an on-off indication of current flow.

Adjustable Current Switch Normally Open - CR9650

The CR9650 Series is a low cost, self powered, adjustable set-point Current Switch designed for applications that require an on-off indication of current flow.

In-line Flat-Surface, Self-Cleaning pH and ORP Electrodes - S660 Series

S660 Series ?In-line ?Flat-Surface, Self-Cleaning pH and ORP Electrodes, Quick disconnect design saves time and money.

Concentrator Lens SiC Based UV Photodiode - SG01L-5LENS

SG01L-5LENS UV Photodiode, 55 mm2 detector area, TO5 housing. 10μW/cm2 peak radiation results a current of approx. 700 nA. Responsivity Range: 221-358 nm.

UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01S-C18

SG01S-C18 is UVC photodiode with 0.06 mm2 detector area, TO18 housing. 10mW/cm2 peak radiation results a current of approx 720 nA. Responsivity Range: 225-28nm.

UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01S-C5

SG01S-C5 is UVC photodiode with 0.06 mm2 detector area, TO5 housing. 10mW/cm2 peak radiation results a current of approx 720 nA. Responsivity Range: 225-287 nm.

UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01M-C5

SG01M-C5 is UVC photodiode with 0.2 mm2 detector area, TO5 housing. 10mW/cm2 peak radiation results a current of approx 2400 nA. Responsivity Range: 225-287nm.

UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01D-C18

SG01D-C18 is UVC photodiode with 0.5 mm2 detector area, TO18 housing. 10μW/cm2 peak radiation results a current of approx 6 nA. Responsivity Range: 225-287 nm.

UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01L-C5

SG01L-C5 is UVC photodiode with1.0 mm2 detector area,TO5 housing. 10μW/cm2 peak radiation results a current of approx 12 nA. Responsivity Range: 225 - 287 nm.

UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01L-C18

SG01L-C18 is UVC photodiode with 1.00 mm2 detector area, TO18 housing. 10μW/cm2 peak radiation results a current of approx 12 nA. Responsivity Range: 225-287nm.

UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01XL-C5

SG01XL-C5 is UVC photodiode with 7.6 mm2 detector area, TO5 housing. Mainly apply to fire control, water treatment, UV astronomy, UV index measure...etc.

UVA-only SiC Based UV Photodiode A = 0.20 mm2 - SG01M-A18

SG01M-A18 UV Photodiode, 0.2 mm2 detector area. TO18 housing. 10mW/cm2 peak radiation results a current of approx 740 nA. Responsivity Range: 309-367nm.

UVA-only SiC Based UV Photodiode A = 0.50 mm2 - SG01D-A18

SG01D-A18 is UVA photodiodes with 0.5 mm2 detector area, TO18 housing. 10μW/cm2 peak radiation results a current of approx 1.85nA . Responsivity Range 309-367nm

UVA-only SiC Based UV Photodiode A = 0.20 mm2 - SG01M-A5

SG01M-A5 UVA photodiode, 0.2 mm2 detector area, TO5 housing. 10mW/cm2 peak radiation results a current of approx 740 nA. Responsivity Range: 309 - 367nm.

UVA-only SiC Based UV Photodiode A = 1.0 mm2 - SG01L-A5

SG01L-A5 UV photodiodes, 1.0 mm2 detector area, TO5 housing, 10μW/cm2 peak radiation results a current of approx 3.7 nA. Responsivity Range: 309-367nm.

UVA-only SiC Based UV Photodiode A = 1.0 mm2 - SG01L-A18

SG01L-A18 UV Photodiode, 1.0 mm2 detector area, TO18 housing. 10μW/cm2 peak radiation results a current of approx 3.7 nA. Responsivity Range: 309-367nm.

UVA-only SiC Based UV Photodiode A = 7.6 mm2 - SG01XL-A5

SG01XL-A5 UVA photodiode, 7.6 mm2 detector area, TO5 housing, 10μW/cm2 peak radiation results a current of approx 28 nA. Responsivity Range: 309 - 367 nm.

Broadband SiC Based UV Photodiode A = 1.0 mm2 - SG01L-18ISO90

SG01L-18ISO90 UV Photodiode, 1.0mm2 detector area, TO18 housing. 10μW/cm2 peak radiation results a current of approx 13nA. Responsivity Range: 221-358 nm.

Broadband SiC Based UV Photodiode A = 1.0 mm2 - SG01L-5

SG01L-5 UV Photodiode, 1.00 mm2 detector area, TO5 housing. 10μW/cm2 peak radiation results a current of approx 13 nA. Responsivity Range: 221 - 358 nm.

Broadband SiC Based UV Photodiode A = 1.0 mm2 - SG01L-5ISO90

SG01L-5ISO90 UV Photodiode, 1.00 mm2 detector area, TO5 housing. 10μW/cm2 peak radiation results a current of approx 13 nA. Responsivity Range: 221 -358 nm.

Broadband SiC Based UV Photodiode A = 1.82 mm2 - SG01F-5ISO90

SG01F-5ISO90 UV Photodiode, 1.82 mm2 detector area, TO5 housing. 1μW/cm2 peak radiation results a current of approx 2.4 nA. Responsivity Range: 221 - 358 nm.

Broadband SiC Based UV Photodiode A = 7.6 mm2 - SG01XL-5

SG01XL-5 UV Photodiode, 7.6 mm2 detector area, TO5 housing. 10μW/cm2 peak radiation results a current of approx 99 nA. Responsivity Range: 221 - 358 nm.

Broadband SiC Based UV Photodiode A = 7.6 mm2 - SG01XL-5ISO90

SG01XL-5ISO90 is with 7.6 mm2 detector area, TO5 housing, 10μW/cm2 peak radiation results a current of approx 99 nA. Responsivity Range: 221 - 358 nm.

Broadband SiC Based UV Photodiode A = 36 mm2 - SG01XXL-8ISO90

SG01XXL-8ISO90 is with 36.00 mm2 detector area, TO8 housing. 10μW/cm2 peak radiation results a current of approx 468 nA. Responsivity Range: 221 - 358 nm.

UVA-only SiC Based UV Photodiode A = 0.06 mm2 - SG01S-A18

SG01S-A18 UVA photodiodes, 0.06 mm2 detector area, TO18 housing. 10mW/cm2 peak radiation results a current of approx 222nA. Responsivity Range: 309-367nm.

ANSI Metering Class Current Transformers - CR170

CR170 Current Transformers are higher-cost units intended for power monitoring applications where high accuracy and minimum phase angle error are required.

CR1A Commercial Class Current Transformers - CR1A

CR1A Commercial Class Current Transformers are lower cost and well-suited for current monitoring applications. Window Diameter: .64 (16.3).

Commercial Class Current Transformers - CR2

CR2 Commercial Class Current Transformers are lower cost and well-suited for current monitoring applications. Window Diameter: 1.13 (28.7).

ANSI Metering Class Current Transformers - CR2DA

CR2DA Current Transformers are higher-cost units intended for power monitoring applications where high accuracy and minimum phase angle error are required.

Split-core Current Transformer - CR3100 Series

The CR3100 Series Split Core Current Transformer is designed to provide a low cost method to monitoring electrical current.

Commercial Class Current Transformers - CR5

CR5 Commercial Class Current Transformers are lower cost and well-suited for current monitoring applications. Window Diameter: 1.56 (39.6).

ANSI Metering Class Current Transformers - CR7A

CR7A Current Transformers are higher-cost units intended for power monitoring applications where high accuracy and minimum phase angle error are required.

Commercial Class Current Transformers - CR56

CR56 Commercial Class Current Transformers are lower cost and well-suited for current monitoring applications. Window Diameter: 2.06 (52.3).

ANSI Metering Class Current Transformers - CR5A

CR5A Current Transformers are higher-cost units intended for power monitoring applications where high accuracy and minimum phase angle error are required.

ANSI Metering Class Current Transformers - CR6A

CR6A Current Transformers are higher-cost units intended for power monitoring applications where high accuracy and minimum phase angle error are required.

Commercial Class Current Transformers - CR7

CR7 Commercial Class Current Transformers are lower cost and well-suited for current monitoring applications. Window Diameter: 2.50 (63.5).

Commercial Class Current Transformers - CR76

CR76 Commercial Class Current Transformers are lower cost and well-suited for current monitoring applications. Window Diameter: 3.00 (76.2)

ANSI Metering Class Current Transformers - CR8

CR8 Current Transformers are higher-cost units intended for power monitoring applications where high accuracy and minimum phase angle error are required.

General Purpose Vertical PCB Mount Current Transformer - CR8320-1600

CR8320 Vertical Mounting, PCB Current Transformers. 220" Window. Used to Current measurements & Power monitoring...

Vertical PCB Mount Current Transformers - CR8348

CR8348 Veritical Mounting, PCB Current Transformers. 270" Window. Used to Current measurements & Power monitoring...

Vertical PCB Mount Current Transformers - CR8349

CR8349 Veritical Mounting, PCB Current Transformers .350" Window. Used to Current measurements & Power monitoring...

Vertical PCB Mount Current Transformer - CR8350

CR8350 Veritical Mounting, PCB Current Transformers .500" Window. Used to Current measurements & Power monitoring...

Wire Lead Current Transformers - CR8401

CR8401 Wire Lead Current Transformers. 275" Window. Major applications include ground fault relays, current measurements, power monitoring...

Wire Lead Current Transformers - CR8410

CR8410 Wire Lead Current Transformers. 350" Window. Major applications include ground fault relays, current measurements, power monitoring...

UVB-only SiC Based UV Photodiode - SG01S-B18

SG01S-B18 UVB photodiode, 0.06 mm2 detector area, TO18 housing. 10mW/cm2 peak radiation results a current of approx 750 nA. Responsivity Range: 231-309nm.

Wire Lead Current Transformers - CR8420

CR8420 Wire Lead Current Transformers .590" Window. Major applications include ground fault relays, current measurements, power monitoring...

UVB-only SiC Based UV Photodiode - SG01M-B18

SG01M-B18 UV photodiode, 0.2 mm2 detector area, TO18 housing. 10mW/cm2 peak radiation results a current of approx 2500 nA, Responsivity Range: 231-309nm.

Wire Lead Current Transformers - CR8448

CR8448 Wire Lead Current Transformers. 280" Window. Major applications include ground fault relays, current measurements, power monitoring...

Wire Lead Current Transformers - CR8449

CR8449 Wire Lead Current Transformers. 354" Window. Major applications include ground fault relays, current measurements, power monitoring...

Wire Lead Current Transformers - CR8450

CR8450 Wire Lead Current Transformers. 515" Window. Major applications include ground fault relays, current measurements, power monitoring...

UVB-only SiC Based UV Photodiode - SG01L-B5

SG01L-B5 UVB photodiode,1.0 mm2 detector area, TO5 housing. 10μW/cm2 peak radiation results a current of approx 12.5 nA. Responsivity Range: 231-309 nm.

Revenue Grade Wire Lead Current Transformer - CR8459-2000-N

CR8459-2000-N Wire Lead Current Transformer. 750" Window. Major applications include ground fault relays, current measurements, power monitoring...

UVB-only SiC Based UV Photodiode - SG01L-B18

SG01L-B18 UVB photodiode, 1.0 mm2 detector area, TO18 housing. 10μW/cm2 peak radiation results a current of approx 12.5 nA. Responsivity Range: 231-309nm.

PCB Current Transformer - CR8750 Series

The CR8750 Series, PCB Current Transformer provides a low cost method for monitoring electrical current.

Medium Voltage Current Transformer - CTW3-60-T50 & CTWH3-60-T5

CTW3-60-T50 & CTWH3-60-T50 Medium Voltage Current Transformer - T50 Relay Class. Maximum System Voltage: 5.6kV, BIL 60kV full wave.

Low Ratio Wound Primary Current Transformer - Model 10WP

The Model 10WP is a low ratio wound primary current transformer, suitable for primary currents up to 40 amperes.