Sensors&Transmitters
(1815 products)
Side-Stream/By-Pass Flat-Surface, Self-Cleaning pH and ORP Electrodes - S645 Series
S645 Series ?Side-Stream/By-Pass Flat-Surface, Self-Cleaning pH and ORP Electrodes.
Ground-Loop Interrupt Flat-Surface Self-Cleaning pH and ORP Electrodes - DA650 Series
DA650 Series Ground-Loop Interrupt Flat-Surface Self-Cleaning pH and ORP Electrodes. Sends pH signal over 1000 fee.
Insertion/Wet-tap Flat-Surface, Self-Cleaning pH and ORP Electrodes - S656CD
S600 Series Insertion/Wet-tap ?Flat-Surface, Self-Cleaning pH and ORP Electrodes. CPVC or PVDF construction.
Low Cost Submersion and In-Line pH Electrodes - S222/S260/S270 Series
This series of electrodes is designed to provide an economical multi-purpose solution for in-line or submersion pH measurements.
Submersible Flat-Surface, Self-Cleaning pH and ORP Electrodes - S650/S651 Series
S650/S651 Series submersion pH and ORP electrodes are designed for measurements in tanks, flumes and sewer lines.
UV / Visible Sensor - GVGR-T10GD
GVGR-T10GD ?UV / Visible Sensor, chip size below 0.4mm, TO-46. Apply to UV LED Monitoring, Blue LED Monitoring, UVA Lamp Monitoring and UV Curing.
UV-B Sensor - GUVB-T21GD-U
UV Sensor GUVB-T21GD-U, Good Visible Blindness, High Responsivity & Low Dark Current. Mainly apply to UV-B Lamp Monitorin and UV-B LED Monitoring.
UV / Visible Sensor - GVBL-T12GD
GVBL-T12GD ?UV / Visible Sensor, Chip size below 0.4mm, TO-46 with quartz glass. Apply to UV LED Monitoring, Blue LED Monitoring, UVA Lamp Monitoring&Curing.
UV / Visible Sensor - GVGR-S11SD
GVGR-S11SD ?UV / Visible Sensor, chip size < 0.4mm, SMD3528 PKG, Mainly Apply to UV LED Monitoring, Blue LED Monitoring, UVA Lamp Monitoring and UV Curing.
UV-A Sensor - GUVV-S10SD
UV Senosr GUVV-S10SD with chip size 0.4mm, SMD 3528 PKG, High Responsivity & Low Dark Current. Mainly apply to UV-A Lamp Monitoring.
UV Sensor - GUVV-T10GD-L
UV Sensor GUVV-T10GD-L, Chip size of 1.4mm, TO 46 PKG. Mainly apply to Full UV Band Monitoring, UV-A Lamp Monitoring and Sterilization Lamp Monitoring.
UV-A Sensor - GUVV-T20GD-U
GUVV-T20GD-U UV Sensor, chip size 3.4mm, TO 39 PKG. Mainly apply to Full UV Band Monitoring, UV-A Lamp Monitoring and Sterilization Lamp Monitoring.
UV Sensor Module - GUVV-T21GH
GUVV-T21GH ?UV Sensor Module chip size 0.4mm, TO 5 PKG, High Sensitivity & Good Solar Blindness. Mainly apply to UV-A Lamp Monitoring.
UV-A Sensor - GUVV-T10GD
UV Sensor GUVV-T10GD, Indium Gallium Nitride Based Material. Mainly apply to Full UV Band Monitoring, UV-A Lamp Monitoring and Sterilization Lamp Monitoring.
UVB Sensor - GUVB-S11SD
UV Sensor GUVB-S11SD, Good Visible Blindness, High Responsivity & Low Dark Current. Mainly apply to UV Index Monitoring.
UV-B Sensor - GUVB-T11GD
UV Sensor GUVB-T11GD, Good Visible Blindness, High Responsivity & Low Dark Current. mainly apply to UV-B Lamp Monitoring and UV Index Monitoring.
UV / Visible Sensor - GVBL-S12SD
GVBL-S12SD ?UV / Visible Sensor, chip size below 0.4mm, SMD3528. Apply to UV LED Monitoring, Blue LED Monitoring, UVA Lamp Monitoring and UV Curing.
UV-B Sensor - GUVB-C21SD
UV Sensor GUVB-C21SD, Good Visible Blindness, High Responsivity & Low Dark Current. mainly apply to UV Index Monitoring.
UV Sensor Module - GUVB-T21GH
UV Sensor GUVB-T21GH, Single Supply Voltage Operation, High Sensitivity and Good Solar Blindness. Apply to UV-B Lamp Monitoring and UV Index monitoring.
Broadband SiC Based UV Photodiode A = 0.20 mm2 - SG01M-18S
SG01M-18S UV Photodiode, 0.2 mm2 detector area, TO18 housing. 10mW/cm2 peak radiation results a current of approx 2600 nA. Responsivity Range: 221 - 358 nm.
Broadband SiC Based UV Photodiode A = 0. 20 mm2 - SG01M-18
SG01M-18 UV Photodiode, 0.20 mm2 detector area, TO18 housing. 10mW/cm2 peak radiation results a current of approx 2600 nA. Responsivity Range: 221 - 358 nm.
Broadband SiC Based UV Photodiode A = 0.20 mm2 - SG01M-18ISO90
SG01M-18ISO90 UV Photodiode, 1.0 mm2 detector area, TO18 housing. 10mW/cm2 peak radiation results a current of approx 2600nA. Responsivity Range: 221-358nm.
SiC UV Photodiode - SG01M-5Lens
SG01M-5Lens UV Photodiode, 11.0 mm2 detector area, TO5 housing. 10μW/cm2 peak radiation results a current of approx 140 nA. Responsivity Range: 221 - 358 nm.
Broadband SiC Based UV Photodiode A = 0.50 mm2 - SG01D-18
SG01D-18 UV Photodiode, 0.50 mm2 detector area, TO18 housing. 10μW/cm2 peak radiation results a current of approx 6.5 nA. Responsivity Range: 221-358 nm.
Concentrator Lens SiC UV Photodiode - SG01D-5Lens
SG01D-5Lens UV Photodiode, 0.5 mm2 detector area, TO5 housing. 10μW/cm2 peak radiation results a current of approx 350 nA. Responsivity Range: 221-358nm.
Broadband SiC Based UV Photodiode A = 1.0 mm2 - SG01L-18
SG01L-18 is UV Photodiode with1.00 mm2 detector area, TO18 housing. 10μW/cm2 peak radiation results a current of approx 13 nA. Responsivity Range: 221 - 358 nm.
Broadband SiC Based UV Photodiode A = 0.06 mm2 - SG01S-18ISO90
SG01S-18ISO90 UV Photodiode, 0.50 mm2 detector area, TO18 housing. 10mW/cm2 peak radiation results a current of approx 780 nA. Responsivity Range: 221 - 358 nm.
Broadband SiC Based UV Photodiode A = 0.06 mm2 - SG01S-5
SG01S-5 UV Photodiode, 0.06 mm2 detector area, TO5 housing. 10mW/cm2 peak radiation results a current of approx 780 nA. Responsivity Range: 221 - 358 nm.
RMS Dismountable Hall Effect Current Transmitter - TKC-KDRA Series
TKC-KDRA series current sensor is rms dismountable, which is a open loop device based on the measuring principle of the hall effect, with ...
Hall Effect Voltage Transmitter - TBV-AS12/24 Series
TBV-AS12/24 series current mode voltage sensor is a device based on the principle of the hall effect, with a galvanic isolation between primary and ...
Hall Effect Voltage Sensor - TBV-LV
TBV-LV series current mode voltage sensor is a device based on the principle of the hall effect, with a galvanic isolation between primary and ...
DC Leakage Current Sensor - TDC-EB
TDC-EB series DC leakage current sensor is a series of new device developed according to principle of electromagnetic induction. Its low current is stable.
High Precision Closed Loop Mode Hall Effect Current Sensor - TBC-LTHB
The TBC-LTHB Series current sensor is a closed loop device based on the measuring principle of the hall effect and null balance method, with...
Three-phase Open Loop Mode Hall Effect Current Sensor - TKC-TG3
The TG3 series current sensor is an open loop device based on the principle of the hall effect, with a galvanic isolation between primary and secondary circuit.
UV Sensor - GUVA-T11GD-L
UV Sensor GUVA-T11GD-L, Gallium Nitride Based Material, Good Visible Blindness. Mainly apply to Full UV Band Monitoring and UV-A Lamp Monitoring.
UVA Sensor - GUVA-T21GD-U
UV Sensor GUVA-T21GD-U, Gallium Nitride Based Material, Good Visible Blindness. Mainly apply to Full UV Band Monitoring and UV-A Lamp Monitoring.
UV Sensor Module - GUVA-T21GH
UV sensor GUVA-T21GH, Gallium Nitride Based Material, High Sensitivity and Good Solar Blindness. Mainly apply to UV-A Lamp Monitoring.
UV-A Sensor - GUVA-T11GD
UV Sensor GUVA-T11GD, Gallium Nitride Based Material, Good Visible Blindness. Mainly apply to Full UV Band Monitoring & UV-A Lamp Monitoring...
Reflective UV Sensor - GenUV-L365P-MM
GenUV-L365P-MM Reflective UV Sensor for Money detecting and Counterfeits bill detecting, Light Emission Wavelength - 365nm, Responsing to fluorescence ink.
Reflective UV Sensor - GUVF-P12MD
GUVF-P12MD Reflective UV Sensor, Light Emission Wavelength - 365nm, Money detecting, Counterfeits bill detecting.
Modular Flat Surface pH & ORP Electrodes - S8000CD/S8075CD Series
The S8000 series flat surface self cleaning electrode platform is designed for versatility and flexibility.
UVT-LED Sensor UV Transmittance Sensor - UVT-LED
UV Transmittance Sensor provides reliable UVT measurements for UV disinfection optimization, monitoring of open channel wastewater UV disinfection.
Industrial Contacting Conductivity Sensors - CS650/CS675/CS676 Series
CS650/CS675/CS676 Series Industrial Contacting Conductivity Sensors for submersion or in-line mounting.
Laboratory Dissolved Oxygen Sensor - DO1200
DO1200 and DO1200TC Dissolved Oxygen Sensors ?feature dependable galvanic technology. For portable, laboratory or on-line use.
“ZERO DRIFT” High Accuracy Integrated Temperature Transmitter - WBZPKK-&WXBZPKK- Series
By standardizing, the transmitter corrects the error Pt100 determined when manufactured and the temperature drift error of electrical circuit.
“ZERO DRIFT” High Accuracy Thermocouple Integrated Temperature Transmitter - WBR&WXBR Series
By standardizing, the transmitter corrects the error of thermocouple sensor, the error of complement element ...
Armored Thermocouple - WR Series
WR_KK series assembled armored thermocouple (armored thermocouple core inside, protective tube outside)
Assembled Armored Platinum Resistor - WZPKK Series
WZPKK-armored resistance core is placed in protective tube of Φ6～16mm.
Thermal Flow Sensor - DN-PT20/PT300
This thermal flow sensor develops on technology of Whole Sintered Leads outside Winding Platinum Resistor.
Thermal Flow Sensor - RXAZ
This thermal flow sensor develops on technology of Whole Sintered Leads outside Winding Platinum Resistor.
Thermal Flow Sensor - RX- series
This series thermal flow sensor develops on technology of Whole Sintered Leads outside Winding Platinum Resistor.
Antiseptic Flow Switch Sensor - RXLLK3
This thermal flow sensor develops on technology of Whole Sintered Leads outside Winding Platinum Resistor.
10kg to 2t Load Cell - F3
Nominal Load from 10 kg to 2 t
Class (OIML R60) C2 and C3
Combined Error: 0.018%
Output: 2mV/V
350kg to 7.5t Load Cell - FT1 - FT1A
Nominal Load from 350kg to 7.5 t
Class (OIML R60) C2 and C3
Combined Error: 0.020%
Output: 2mV/V
500kg to 10t Load Cell - FT2
Nominal Load from 500kg to 10t
Class (OIML R60) C2 and C3
Combined Error: 0.019%
Output: 2mV/V
5kg to 100kg Load Cell - FT6
Nominal Load from 5 kg to 100 kg
Class (OIML R60) C2
Combined Error: 0.028%
Output: 2mV/V
5t to 20t Amplified Load Cell - T20AMP
Nominal Load from 5t to 20t
Linearity and Hysteresis 0.03%
Standar output M12 connector
100t to 250t Load Cell - CLT
Nominal Load from 100t to 250t
Class (OIML R60) C1 and C2
Combined Error: 0.1%
Output: 2mV/V
