Sensors&Transmitters
(1815 products)
Analog Metal-Oxide Multi-Gas Sensor - ENS145
The ENS145 sensor component is a micro-machined sensor with long-lifetime and long-term stability.
Digital Metal Oxide Multi-Gas Sensor - ENS160
The ENS160 is a digital multi-gas sensor solution, based on metal oxide (MOX) technology with four MOX sensor elements.
HumiChip? Voltage Output Sensor Module - HCPV-201W-1X
HCPV-201W-1X is an accurate and reliable humidity measuring sensor module based on HumiChip?.
PM2.5 / PM1.0 Particle Sensor - GPSM Series
GPSM Series is a PM2.5 dedicated sensor, in which 's 20years knowledge and technology on Particle Sensor are embedded. With a radical improvement for detection
Resistant to high humidity CO2 transmitter - SH-VT260
It is a CO2, Temp and Humidity transmitter which optimized for long term use and for cultivation of crop as applying High Performance Dual CO2 Sensor.
英國Analox Multi-gas Safety Monitor with Data Output Module - P0159-861
The Ax60+ is a wall-mountable gas safety device for monitoring oxygen and carbon dioxide.
Personal CO2 Safety Alarm - P0244-8001
The CO2BUDDY personal alarm is designed to detect carbon dioxide (CO2) and warn of any dangerous levels in confined spaces
Ultrasonic Rangefinder - UM0034-002
The ultrasonic rangefinder measures the time interval between emitting the ultrasonic pulses and receiving the echo to determine the distance to nearby objects.
Ultrasonic transducer - Rx-HX
The distance to the Ultrasonic Transmitter is measured with a resolution of 1mm.
Ultrasonic transducer - tx-HX
. The distance to the Ultrasonic Transmitter is measured with a resolution of 1mm
Formaldehyde sensor - TB600B
TB600B Formaldehyde module is high quality product, the core sensor adopts EC Sense solid polymer HCHO gas sensor which is the smallest volume of electrochemist
NDIR SENSORS SF6 SENSORS - IFP32-SF6M-NCVSP
NDIR SENSORS: N.E.T. NDIR – the most complete range of Infrared (IR) gas sensor on the market for CO2, SF6, hydrocarbon and refrigerant gases
韓國rezontech Flame detector - RFD-3000X
RFD-3000X is a Triple IR (IR3) Flame Detector with international certifications.
Online O2 monitoring in bioreactors and fermenters - OIM Oxygen probe
The oxygen probe for in-line measurement (OIM) consists of a fitting made of
stainless steel with an optical exchange cap (OEC).
VOC GAS SENSOR Model C?21 - C?21
The model C?21 is a solid?state gas monitor capable of sensing a variety of gases and vapors.
OZONE CONTROLLER - OEM-3
The OEM-3 is a system to control ozone generators and alarms based on an adjustable ozone concentration set point.
OEM OZONE CONTROLLER - OEM-1
The model OEM-1 is a system to control ozone generators and alarms based on an adjustable ozone concentration set point.
OEM OZONE CONTROLLER - OEM-2
The model OEM-2 is a system to control ozone generators and alarms based on an adjustable ozone concentration set point.
Electrochemical Hydrogen Chloride Sensor (HCL Sensor) - HCl/C-200
HCl/C-200 Electrochemical Hydrogen Chloride Sensor (HCL Sensor). ?Applicy for Safety and Environmental Control. Nominal Range 0 - 200 ppm.
Electrochemical Hydrogen Chloride Sensor (HCL Sensor) - HCl/M-200
HCl/M-200 Electrochemical Hydrogen Chloride Sensor (HCL Sensor). For Portable Gas Detectors, Safety and Environmental Control.
Compact Sulfur Dioxide Gas Sensor (SO2 Sensor) - SO2/C-100
SO2/C-100 ?Sulfur Dioxide Sensor (SO2 Sensor). Highest reliability and maximum performance in a compact housing. Suitable in most of all applications.
Miniature Sulfur Dioxide Gas Sensor (SO2 Sensor) with Filter - SO2/MF-100
SO2/MF-100 Sulfur Dioxide Sensor (SO2 Sensor), Industry standard for portable gas detectors. Widely-used format for personal safety.
Miniature Plastic Optical Liquid Level Sensor - OS-950
OS-950 Optical Liquid Level Sensor for low level or point level monitoring for medical diagnostic equipment, sterilizers and washer, or dialysis equipment.
High Pressure Optical Liquid Level Sensors - OS-150
OS150 stainless steel optical level sensor is designed for high-pressure water and liquid level sensing, and is capable of measure with 1/16" accuracy.
Compact Metal Oxide Gas Sensor - MiCS-5524
MiCS-5524 is a robust MEMS sensor for indoor carbon monoxide and natural gas leakage detection; suitable also for indoor air quality monitoring...
Classic Line 4-CH3SH-10 Methyl Mercaptan Sensor 0-10 ppm - CLE-3611-400
Classic Line 4-CH3SH-10 Methyl Mercaptan Sensor 0-10 ppm. Expected Operating Life 2 years in air?. Operating conditions -20 to 50°C, 15 ~ 90%RH non-condensing.
Electrochemical Formaldehyde Sensor (CH2O Sensor) - NE-HCHO-S
NE-HCHO-S is applicable for detecting and measuring formaldehyde generated from woody construction material or remained concentration after sterilization.
Analog Humidity and Temperature Sensor - HTU21P
HTU21P(F) is a new humidity and temperature sensor which is with PWM interface, analog output.
Intelligent NDIR Infrared CO2 Sensor Module - MH-Z19B
MH-Z19B NDIR CO2 Sensor for indoor air quality monitoring, Range: 0-2000ppm/0-5000ppm CO2, Good stability, Long lifespan
Oxygen Gas Sensor (O2 Sensor) - 4OXV CiTiceL
4OXV CiTiceL Oxygen (O2) Gas Sensor is designed for operation in a wide range of environments and harsh conditions.
NDIR CO2 Sensor Module for Carbon Dioxide Detection - MH-Z14
MH-Z14 NDIR Infrared gas module is a common type, small size sensor, using non-dispersive infrared (NDIR) principle to detect the CO2 in the air.
Probe Humidity and Temperature Transmitter - CAEL-S16
CAEL-S16 Probe Humidity and Temperature Transmitter, 0 - 100%RH, 0 -1V/5V/10V, RS485, M12 - 4 pin connector.
Electrochemical Carbon Monoxide Gas Sensor (CO Sensor) - 4CM CiTiceL
4CM CiTiceL Carbon Monoxide Sensor (CO Sensor), 3 electrode miniature sensor with acid gas filter, Expected Operating Life 2 years in air.
Electrochemical Sulfur Dioxide Gas Sensor (SO2 Sensor) - 4S Rev. 2 CiTiceL
4S Rev. 2 CiTiceL Sulfur Dioxide Gas Sensor (SO2 Sensor), NEW 3 Electrode miniature sensor with H2S filter, Expected Operating Life 2 years in clean air.
MEMS Mass Flow Sensors - FS5001L Series
FS5001 series mass flow sensors are designed for general purpose flow monitoring and control applications. Flow Range from 0-200 sccm up to 0-6000 sccm.
Electrochemical Ethylene Oxide Gas Sensor (C2H4O Sensor) - 7ETO CiTiceL
7ETO CiTiceL Electrochemical Ethylene Oxide Gas Sensor (C2H4O Sensor), 3 Electrode compact sensor, Expected Operating Life Two years in air.
Electrochemical Phosphine Gas Sensor (PH3 Sensor) - 4PH-Fast CiTiceL
4PH-Fast CiTiceL Phosphine Sensor (PH3 Sensor), 3 Electrode minature sensor for phosphine with improved response time, Expected Operating Life 2 years in air.
Hydrogen Cyanide Gas Sensor (HCN Sensor) - 4HN CiTiceL
4HN CiTiceL Hydrogen Cyanide Gas Sensor (HCN Sensor), 3 Electrode minature sensor, Expected Operating Life Two years in air.
Ultra-Low Power Analog Nitrogen Dioxide Sensor Module - ULPSM-NO2 968-047
ULPSM-NO2 968-047 Ultra-Low Power Analog Sensor Module for NO2, 0 to 3 V Analog Signal Output, Measurement Range: 0 to 20 ppm?.
15x15 Nitrogen Dioxide Sensor 0-5ppm P Package 110-507 - 3SP_NO2_5F P
3SP_NO2_5F P 15x15 Filtered 0-5 ppm NO2 Sensor in Pinned Package 110-507. Measurement Range: 0 to 5 ppm. Use for Air Quality Monitoring...
Digital Gas Sensor Developer Kit - DGSDK 968-045
DGSDK 968-045 ?Digital Gas Sensor Developer Kit. Easily add any SPEC Sensor to your design with our Open-Source Digital Gas Sensor Developer Kit.
15x15 Ozone Sensor O3 Sensor C Package 110-407 - 3SP_O3_20 C
3SP_O3_20 C 15x15 O3 Sensor C Package 110-407. Measurement Range: 0 to
15x15 Filtered 0-5ppm NO2 Sensor C Package 110-508 - 3SP_NO2_5F C
3SP_NO2_5F C 15x15 Filtered 0-5 ppm NO2 Sensor in C Package, Measurement Range?: 0 to 5 ppm?, used for Air Quality Monitoring...
15x15 Ozone Sensor O3 Sensor Pinned Package 110-406 - 3SP_O3_20 P
3SP_O3_20 P 15x15 Ozone Sensor O3 Sensor Pinned Package 110. Measurement Range: 0 to >20 ppm. Long Life. Low Power Consumption. Use for Air Quality Monitoring..
Digital Ozone (O3) Gas Sensor Module - DGS-O3 968-042
DGS-O3 968-042 Digital Ozone Sensor O3 Sensor Module, 0 to 5ppm Ozone sensor with digital output. 20 ppb? Resolution.
Ultra-Low Power Analog Ozone (O3) Sensor Module - ULPSM-O3 968-046
ULPSM-O3 968-046 Ultra-Low Power Analog O3 Sensor Module, 0 to 3 V Analog Signal Output, Measurement Range: 0 to 20 ppm?.
Digital Nitrogen Dioxide (NO2) Gas Sensor Module - DGS-NO2 968-043
DGS-NO2 968-043 Digital Gas Sensor Module for Nitrogen Dioxide (NO2), 0 to 10 ppm NO2 sensor with digital output.
Digital Temperature and Humidity Sensor Replace Sensirion SHT21 - HTU21
HTU21D is a digital humidity sensor (RH&T) with I2C format output which can pin to pin replace SHT21.
Probe Style Relative Humidity Sensor Module - HM1500LF
HM1500LF is a dedicated humidity transducer designed for OEM applications where a reliable and accurate measurement is needed.
Capacitive Humidity Sensor - HS1101/HS1101LF
HS1101LF Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive applications
Voltage Output Temperature and Humidity Sensor - HTG3515CH
HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed.
Frequency Output Temperature and Humidity Sensor - HTF3226LF
HTF3226LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed.
Capacitive Temperature and Humidity Sensor - HTS2030SMD
HTS2030SMD Based on a unique capacitive cell for humidity measurement and a Negative Temperature Coefficient (NTC) thermistor for temperature measurement.
Relative Humidity Sensor - HM1520/HM1520LF
Based on the rugged HS1101LF capacitive humidity sensor, HM1520LF is a dedicated humidity transducer designed for measurements at low humidity.
Temperature and Humidity Sensor with PTFE membrane - HTU21DF
HTU21DF sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed.
Digital Relative Humidity and Temperature Sensor - HTU20D
HTU20D is a new digital humidity sensor with temperature output of MEAS. This sensor provides calibrated, linearized signals in digital, I2C format.
